PRODUCTS
This machine is suitable for testing the peel strength between the sole and the upper of the finished shoe.
Product Description:
This machine is suitable for testing the peel strength between the sole and the upper of the finished shoe. The principle is to put the shoe last on the machine, and use a peeling knife to peel off the joint between the sole and the upper. The force required for peeling is measured as the peeling force. Calculate its peel strength. Up and down, left and right, front and rear distances can be adjusted to meet the test of shoes of different sizes.
Standards:
GB/T 3903.3, BS 1870.BS 4676.SATRA Tm404
Specification:
Knife-edge width | (20±0.2) mm and (10±0.2) mm |
Capacity | 2000N (accurate to 0.01N) |
Test piece | Elastomer, linear deviation, indication deviation, and evaluation change are not more than 3% |
Knife edge down speed | 20±2mm/min, the rising and falling speed are adjustable |
Spacing between positioning rod and tie rod | 50-70 mm adjustable |
Average lift range | 40mm |
| Force value display mode | touch screen display, easy and intuitive to read |
| Force value induction | induction by high-precision sensor |
| Size (W*D*H) | 650×330×800mm |
| Weight | about 50kg |
| Power supply | AC~220V50HZ |

Copy product links
Long by picture save/share
enquiry form:
Inquiry Content:
You have no items to require

enquiry form:
Inquiry Content:
You have no items to require
